Zoom RT-223 - Manual (Page 56)

Using Effects (Effect Mode)
ZOOM RT-223 56
the patch to use.
The new patch is called up immediately.
HINT
When you select an empty patch, the
i n d i c a t i o n " E M P T Y " a p p e a r s o n t h e
display. In this case, the sound does not
change.
3.
Press the [EDIT] key.
The [REVERB] key flashes and the patch edit
screen appears.
4.
Use the cursor left/right keys to
bring up the indication "DR SEND"
on the display.
This screen lets you adjust the overall send level
of the drum kit.
HINT
You can change the send level for each
drum/percussion sound separately. To do
this, adjust the send level for each pad in
kit mode (
→ p. 51).
5.
Use the VALUE [+]/[-] keys to adjust
the drum kit send level. The send
level can be adjusted in the range
from 0 - 100.
HINT
T h e R E V E R B e f f e c t c o m p r i s e s t h e
KICKDRY parameter that excludes the
s o u n d o f t h e k i c k d r u m f r o m e f f e c t
processing. When this parameter is ON,
the sound of pad 0 in pad bank 1/2 will not
be changed by the REVERB effect. (The
same applies if the pad send level is raised
in kit mode.) For information on how to turn
the KICKDRY parameter on and off, see
the section "Editing effect patches".
6.
Use the VALUE [+]/[-] keys to bring
up the indication "BS SEND" on the
display.
This screen lets you adjust the send level of the
bass program.
7.
Use the VALUE [+]/[-] keys to adjust
the bass program send level.
8.
When the send level patch has been
adjusted, press the [EXIT] key.
The RT-223 returns to the condition of step 1.
9.
Save the current patch.
For information on how to save an effect patch,
see page 58.
NOTE
The send level setting for the drum kit/bass
program is saved as part of the patch. If
you swit c h to a not he r p a tc h wi thout
storing the edited patch first, the edit
contents will be lost.
10.
To temporarily bypass the REVERB
effect, press the [REVERB] key so
that the key goes out.
The REVERB effect is turned off, and the
indication "BYPASS" is shown on the display. To
turn the REVERB effect back on, press the
[REVERB] key once more so that the key is lit.
11.
To terminate the REVERB effect
setting, press the [EXIT] key.
The effect mode is terminated, and the RT-223
returns to the previous mode.
EFFECT
ON
Drum kit send level
DR SEND
5
RT223(E).fm 56 ページ ２００５年５月２６日 木曜日 午後１２時３分