Changing the tempo of pattern playback, Tempo – Zoom RT-223 User Manual
Page 21
Playing the Patterns (Pattern Mode)
ZOOM RT-223
21
[
P
] key sets the unit to pause mode. The PLAY
[
R
] key flashes. Pressing the PLAY [
R
] key
again in this condition resumes playback from the
point where it was paused.
Changing the tempo of
pattern playback
When playing a pattern in pattern mode, the
playback tempo for the pattern can be varied over
the range of 40 - 250 BPM (BPM = beats per
minute, using quarter notes).
1.
Press the [TEMPO] key.
The display shows the current tempo for about 2
seconds.
2.
Use the VALUE [+]/[-] keys to set the
tempo.
To return to the condition before the [TEMPO]
key was pressed, press the [EXIT] key or simply
wait a while.
3.
To set the tempo directly by manual
input, tap the [TEMPO] key twice
while the indication "TEMPO" is
shown on the display (tap tempo
input function).
While the pattern is stopped or playing, pressing
the [TEMPO] key once to bring up the "TEMPO"
indication, and then pressing the [TEMPO] key
twice in succession will set the tempo by taking
the key press interval as a quarter note. Simply
tap the [TEMPO] key in sync with the song
rhythm.
NOTE
The tempo set in pattern mode applies to
all patterns.
Tempo
TEMPO
120
TEMPO
125
Tempo value
Tap twice
RT223(E).fm 21 ページ 2005年5月26日 木曜日 午後12時3分