Zoom RT-223 - Manual (Page 55)

Using Effects (Effect Mode)
ZOOM RT-223 55
Using the COMP EQ
effect
This section describes how to use the COMP EQ
effect.
1.
In pattern, song, or groove play
mode, press the [COMP EQ] key
several times, so that the key lights
up.
The RT-223 switches to effect mode, and the
COMP EQ effect becomes ON. The display
changes as follows.
2.
Use the VALUE [+]/[-] keys to select
the patch to use.
The new patch is called up immediately.
HINT
• When you select an empty patch, the
indication “EMPTY” appears on the
display. In this case, the sound does not
change.
• If a playable pattern or song is selected in
pattern or song mode, pressing the PLAY
[
R ] key will start playback of the pattern
or song. This lets you check the sound.
3.
To temporarily bypass the COMP EQ
effect, press the [COMP EQ] key so
that the key goes out.
The COMP EQ effect is turned off, and the
indication “BYPASS” is shown on the display. To
turn the COMP EQ effect back on, press the
[COMP EQ] key once more.
4.
When the COMP EQ effect patch
has been selected, press the [EXIT]
key.
The effect mode is terminated, and the RT-223
returns to the previous mode.
Using the REVERB effect
This section describes how to use the REVERB
effect. For this effect, you first select the patch
and then separately adjust the send level for the
drum kit and bass program.
1.
In pattern, song, or groove play
mode, press the [REVERB] key
several times, so that the key lights
up.
The RT-223 switches to effect mode, and the
REVERB effect becomes ON. The display
changes as follows.
2.
Use the VALUE [+]/[-] keys to select
COMP EQ effect
patch name COMP EQ effect
patch number
BOTTOM
1
REVERB effect patch name
REVERB effect
patch number
STUDIO
0
RT223(E).fm 55 ページ ２００５年５月２６日 木曜日 午後１２時３分