Zoom RT-223 - Manual (Page 20)

ZOOM RT-223 20
Playing the Patterns (Pattern Mode)
This section describes how to play patterns of the RT-223.
Playing a pattern
The RT-223 incorporates 511 accompaniment
patterns. In the factory default condition, the
patterns 0 - 439 are preprogrammed.
1.
Press the [PATTERN] key.
The [PATTERN] key lights up and the RT-223
goes into pattern mode. The name and number of
the currently selected pattern appears on the
display.
2.
Use the VALUE [+]/[-] keys to select
the pattern to play.
3.
Press the PLAY [ R ] key.
The PLAY [ R ] key lights up and the pattern is
played repeatedly.
The [TEMPO] key flashes according to the tempo
of the pattern.
The display shows the current position in the
pattern (measure/beat).
HINT
• You can use the pads for manual play
while a pattern is playing.
• You can switch the pattern number while
a pattern is playing.
4.
To mute only the bass track, press
the [BASS MUTE] key.
The key lights up and the bass track is muted
(only the drum track is heard). To turn the bass
track back on, press the [BASS MUTE] key once
more.
HINT
The bass track can be muted while the
pattern is stopped.
5.
Press the STOP [ P ] key to stop the
pattern.
Pressing the PLAY [
R ] key instead of the STOP
Pattern name Pattern number
POPS1VA
025
001-04
025
Measure Beat Pattern
number
RT223(E).fm 20 ページ ２００５年５月２６日 木曜日 午後１２時３分