Zoom RT-223 - Manual (Page 24)

Entering Patterns in Real Time
ZOOM RT-223 24
Drum track
Snare drum
Figure 1
Deleting the sound of a
specific pad
Bass drum
Snare drum
Bass drum
Drum track
Snare drum
Figure 2
Deleting the sound of the
entire drum track
Bass drum
Snare drum
Bass drum
real-time recording, the REC [ O ] key
starts to flash and pattern recording is
suspended. In this condition, tapping the
pads will produce sound, but it is not
r e c o r d e d . T h i s i s u s e f u l t o c h e c k
phrasing and sound before actually
recording. To resume recording, press the
REC [
O ] key once more.
12 .
To erase the sound from a specific
pad, push the pad while holding
down the [DELETE/ERASE] key.
While the key is held down, the sound from that
pad is erased from the pattern, as shown in Figure
1 below.
To erase the entire track, push the [DRUM] key
while holding down the [DELETE/ERASE] key.
While both keys are held down, all sounds in that
track are erased, as shown in Figure 2 below.
13 .
To repeat a sound, tap the pad while
holding down the [REPEAT/STEP]
key.
By holding down the [REPEAT/STEP] key while
hitting a pad, a percussion sound can be recorded.
14 .
When real-time input of the drum
track is completed, press the STOP
[
P ] key.
Pattern recording stops.
Pad
RT223(E).fm 24 ページ ２００５年５月２６日 木曜日 午後１２時３分