Disconnect device, Disconnect device -2 – Xerox 4110 User Manual
Page 76
Xerox 4590 EPS/4110 EPS System Administration Guide
5-2
5. Safety and Notices
WARNING:
You may incur a severe electrical shock if the outlet is
not grounded correctly.
WARNING:
This product must be connected to a protective earth
circuit.
•
Do not place the machine where people may step or trip on the
power cord. Do not place objects on the power cord.
•
Do not override or disable electrical or mechanical interlocks.
•
Do not obstruct the ventilation openings. These openings
prevent overheating of the machine.
WARNING:
Never push objects of any kind into slots or openings
on this equipment. Making a contact with a voltage point or
shorting out a part may result in fire or electrical shock.
If any of the following conditions occur, immediately switch off the
power to the machine and disconnect the power cord from the
electrical outlet. Call an authorized Xerox service representative
to correct the problem.
•
The machine emits unusual noises or odors.
•
The power cord is damaged or frayed.
•
A wall panel circuit breaker, fuse, or other safety device is
tripped.
•
Liquid is spilled into the machine.
•
The machine is exposed to water.
•
Any part of the machine is damaged.
Disconnect device
The power cable is the disconnect device for this equipment and is
attached to the back of the machine as a plug-in device. To
remove all electrical power from the machine, disconnect the
power cable from the electrical outlet.
WARNING:
This product must be connected to a protective earth
circuit.