Xerox 4110 - Manual (Page 6)

Xerox 4590 EPS/4110 EPS System Administration Guide 1-2
1. Overview
Tools
KEY POINT:
The User Interface (UI) screens shown in this guide
may or may not reflect the screens displayed on your system. The
UI screens are a representation of the type of screens that
may
be
seen on your particular system and vary from system to system
and from marketplace to marketplace. Also, some features
displayed on the UI screens may not be enabled for this product or
are not applicable.
User Interface
The User Interface (UI) consists of the Touch Screen and the
Control Panel.
The Touch Screen is located at the center of the UI. Messages
required for operation and feature buttons are displayed on this
display. You can directly touch the buttons and tabs displayed on
the touch screen to set features or to instruct operations in
screens.
When a print job is submitted from the DocuSP Controller, the
machine status, such as out of paper, toner low, paper jam,
starting and completing the job, will be displayed. It also allows the
users to confirm the print data processing status, and to pause,
restart, and stop the print jobs.
DocuSP Controller
The DocuSP Controller also allows the user to start, stop, and
delete print jobs. It provides all of the operations necessary to
control and print jobs including the setting up of properties for the
print job, the managing of jobs in the queue, job status
information, and security and authentication information.