Xerox 4110 - Manual (Page 13)

Xerox 4590 EPS/4110 EPS System Administration Guide 2-1
2. Installation
This chapter describes the network and interface connections
required for this printing system and how to install the network
cable connection.
Network connectivity
This section provides an overview of the network environment
where the machine is able to provide print services by connecting
to the DocuSP Controller.
There are two communication connections required for this print
system:
•
A network Ethernet connection
• A DocuSP Controller - to - Printer interface connection
The DocuSP Controller requires one external network drop, or
cable, for communications with the client workstations submitting
jobs and for access to the internet.
A communication interface cable between the DocuSP Controller
and the network printer is also installed. Data is sent via this cable
from the Controller to the machine for printing.
KEY POINT:
For more information about the installation of the
network cable and the DocuSP communication cable, refer to the
Xerox Analyst.