Xerox 4110 - Manual (Page 68)

Xerox 4590 EPS/4110 EPS System Administration Guide 4-50
4. Setups
Receiving Buffer - Port
9100
Set the Port9100 receiving buffer. Set a value from 64 to 1024
KB, in 32 KB increments.
Other settings
For information about each of the following items, refer to
“Overview of features” in this guide.
Make settings relating to the paper used in the machine.
1. From the
Print Mode Settings
screen, select
Other Settings
.
2. Select the item to be set or changed, and select
Change
Settings
.
3. Select the item to be changed.
4. Select
Save
to save the setting and return to the previous
screen.
Print Area
Select whether or not to expand the print area.
For information about the print area, refer to the section of the
User Guide entitled “Printable area”.
Substitute Tray
When there is no tray containing the paper size selected by the
automatic tray selection, select whether or not to print replaced
with paper loaded in another paper tray. In the event of using
substitute tray, set the size.
•
Display Message:
Do not use substitute tray, but display a
paper loading message.
•
Use Larger Size:
Replace with the next larger paper size
than that selected, and print at the same size.
•
Use Closest Size:
Replace with the closest paper size to that
selected, and print. If necessary, the printing is automatically
reduced in size.
NOTE: If there is a client specification, the client specification
takes precedence.
•
Select Tray 5 (Bypass):
Prints on the paper loaded in tray 5.