Xerox 4110 - Manual (Page 72)

Xerox 4590 EPS/4110 EPS System Administration Guide 4-54
4. Setups
System Administrator password
Set the password for System Administration mode.
KEY POINT:
This is recommended for stronger security.
NOTE: The default setting of the system administrator password
is x-admin.
The
System Administrator Password
appears in the
Login
Setup/Auditron Administration
operation after
Yes
is selected
for using a password. Set the password after setting the System
Administrator UserID. The password can be from 4-12 numeric
digits.
1. From the
System Administrator Settings
screen, select
System Administrator Password
.
2. To enter the new password, select
Keyboard
.
3. On the
Keyboard
screen, use either the numeric pad on the
Control Panel or the screen keyboard to enter the new
password from 4-12 numeric digits and select
Save
.
4. In
Re-enter Password
, select
Keyboard
again, enter the
same password, and select
Save
.
NOTE: To set no password, leave the password blank, and
select Save.