Xerox 4110 - Manual (Page 34)

Xerox 4590 EPS/4110 EPS System Administration Guide 4-16
4. Setups
Auto print
Set the time from the end of the print job until the execution of the
next print job. Set the value from 1 to 240 seconds, in one second
increments.
If you select
Off
, once the machine is ready, printing can start
immediately.
1. From the
Machine Clock/Timers
screen, select
Auto Print
,
and select
Change Settings
.
2. Select
Off
or
On
.
3. If you selected
On
, set the wait-to-print time by using the ,
, or the numeric keypad to enter a numeric quantity.
4. Select
Save
to save the settings and return to the previous
window.