Auto job promotion – Xerox 4110 User Manual
Page 56
Xerox 4590 EPS/4110 EPS System Administration Guide
4-38
4. Setups
1.
From the
Common Settings
screen, select
Other Settings
.
2.
Select the item to be set or changed, and select
Change
Settings
.
NOTE: Select to display the previous screen and select
to display the next screen.
3.
Select the default setting.
4.
Select
Save
. You are returned to the
Other Settings
screen.
5.
Repeat Steps 1-4 for selecting the default setting for any
additional desired
Other Settings
items.
6.
Select
Close
to return to the
Common Settings
screen.
7.
Select
Close
to return to the
System Settings
screen.
Auto job promotion
This
Other Settings
option allows you to set the machine to
automatically promote a job for printing if the machine is unable to
start a prior job. For example, the machine is unable to start an
operation because there is no paper in the tray (at the start of a
print operation). If this feature is enabled, then the machine can
bypass the current job and allow other jobs to start.
KEY POINT:
The other jobs must not have the same print
requirements as the faulted job. If other jobs have different print
requirements, then these other jobs can be promoted and printed.