Paper type priority – Xerox 4110 User Manual
Page 50
Xerox 4590 EPS/4110 EPS System Administration Guide
4-32
4. Setups
Paper type priority
Set the paper type priority sequence for automatic tray selection.
Automatic tray selection means that a tray containing the
appropriate paper is automatically selected by the machine for
printing.
You can select from a variety of paper types including bond paper,
plain paper, recycled paper, side 2 paper, etc.
NOTE 1: The paper type selections for this feature will vary
depending on your machine and your work environment
requirements (such as the types of paper you use most
frequently).
NOTE 2: The paper type setting takes precedence over the tray
priority sequence. If different paper types appear in the same
priority sequence, the paper selection is determined by tray
priority sequence.
For information about the tray priority sequence, refer to “Paper
tray priority” in this chapter.
1.
From the Paper Tray Settings screen, select
Paper Type
Priority
.
2.
Select the item to be set or changed, and select
Change
Settings
.