Xerox 4110 - Manual (Page 45)

Xerox 4590 EPS/4110 EPS System Administration Guide 4-27
4. Setups
Auto Size Detect
Standard-sized paper loaded in trays 3, 4, 6, and 7 is
automatically detected.
Variable Size
When setting a non-standard size for trays 3 and 4, set the size in
the
X
(horizontal) direction within the range of 182-488 mm (7.2-
19.21 in.) and in the
Y
(vertical) direction within the range 148-330
mm (5.5-13 in.) in 1 mm increments. For trays 6 and 7, set the size
in the
X
direction within the range 210-241 mm (8.3-9.5 in.) and in
the
Y
direction within the range 297-330 mm (11.7-13 in.) in 1 mm
increments.
5. From the
Paper Size
screen, select
Save
to save the paper
size and return to the previous screen.
6. To change the paper type for this tray, select
Paper Type
.
When selecting
Paper Type
, keep the following in mind:
• For trays 1, 2, 6, and 7 you can select from six paper types
and from custom paper types 1-5.
• For trays 3 and 4 you can select from seven paper types,
and from custom paper types 1-5.
• In tray 5 (Bypass) you can select from eleven paper types
and from custom paper types 1-5.
• If the optional OHCF (tray 6) is installed, an additional
Paper Type option,
Coated Stock
, is available for
selection.