Xerox 4110 - Manual (Page 30)

Xerox 4590 EPS/4110 EPS System Administration Guide 4-12
4. Setups
NTP time synchronization
You can get the time from a time server (NTP: Network Time
Protocol), to synchronize the machine to the time server time.
1. From the
Machine Clock/Timers
screen, select
NTP Time
Synchronization
, and select
Change Settings
.
2. Select
On
or
Off
.
3. If you selected
On
, use the numeric keypad to enter the IP
address for the time server.
•
Off:
A connection is not made to the time server.
•
On:
A connection is made to the time server.
•
IP Address:
Set the IP address of the time server from
which the time is obtained, using values 0 to 255.
NOTE 1: Addresses 244 to 255.XXX.XXX.XXX and
127.XXX.XXX.XXX cannot be set.
NOTE 2: Select Next to enter the next part of the IP address if
the address between dots is less than 3 digits.
4. Select
Save
to save the settings and return to the previous
window.