Yamaha Professional Audio Workstation AW4416 - Manual (Page 411)

AUTOMIX screen
— Reference Guide
123
C Selected event
Editing will apply to the event that is enclosed
by a dotted line in the list. Move the cursor to
the parameter that you wish to edit, and rotate
the [DATA/JOG] dial to edit the value.
D TIME
This area shows the time at which the event is
recorded, as hours/minutes/seconds/millisec-
onds. (The minimum unit is 25 milliseconds.)
You can move the cursor to this area and rotate
the [DATA/JOG] dial to move the location of the
event.
Tip!
Regardless of the display method selected in
the SONG screen Setting page, the timing in
the event list is always displayed as time.
If you edit the TIME the events in the list will
be re-ordered automatically. This means that
the displayed order of the events may
change.
E EVENT
This area shows the type of each event. Move
the cursor here and rotate the [DATA/JOG] dial
to edit the event.
F CHANNEL
This area shows the channel of the event. Move
the cursor here and rotate the [DATA/JOG] dial
to change the channel.
G SELECTED CH ONLY (selected channel
only) button
If you press a [SEL] key when this button is on,
only the events of that channel will be dis-
played.
H DUPLICATE button
When you move the cursor to this button and
press the [ENTER] key, a duplicate of the
selected event will be created at the same loca-
tion.
I DELETE button
When you move the cursor to this button and
press the [ENTER] key, the selected event will
be deleted.
Tip!
For the procedure of duplicating or deleting
an event, refer to Operation Guide “Chapter
14. Automix.”