Yamaha Professional Audio Workstation AW4416 - Manual (Page 327)

— Reference Guide
39
MIDI
MIDI screen
MIDI Setup page
Make basic MIDI settings
[Function]
Set the MIDI transmit/receive channels,
turn transmission/reception of various
messages on/off, and specify the port
used for transmission and reception.
[Key operation]
• [MIDI] key → [F1] (MIDI Setup) key
• Repeatedly press the [MIDI] key until
the screen shown at the right appears.
[Mouse operation]
M button→ MIDI button → MIDI Setup
tab
[Screen functions]
A PROGRAM CHANGE TX (program
change transmission)
Specify whether program changes will be trans-
mitted to external MIDI devices. If this button is
on, the program change assigned to a scene
number will be transmitted when that scene is
recalled.
B PROGRAM CHANGE RX (program
change reception)
Specify whether program changes will be
received from external MIDI devices. If this but-
ton is on, receiving a program change will
recall the scene assigned to that program num-
ber.
C PROGRAM CHANGE OMNI
If this button is on, program changes of all MIDI
channels will be received, regardless of the Rx
(receive channel) setting.
D PROGRAM CHANGE ECHO
If this button is on, received program changes
will be re-transmitted without change (“thru-
ed”) from the MIDI OUT connector or TO
HOST connector.
E CONTROL CHANGE ECHO
If this button is on, received control changes
will be re-transmitted without change from the
MIDI OUT connector or TO HOST connector.
F Tx CH (transmit channel)
Select the channel (1–16) on which MIDI mes-
sages will be transmitted to external MIDI
devices.
G Rx CH (receive channel)
Select the channel (1–16) on which MIDI mes-
sages will be received from external MIDI
devices.
H MIDI OUT SEL. (MIDI OUT select)
This selects whether the MIDI OUT connector
will be used as MIDI OUT or as MIDI THRU. If
“MIDI THRU” is selected, operations performed
on the AW4416 itself will not be output.
If you wish to transmit MIDI Clock to an
external MIDI device, you must set this to
“MIDI OUT.” For details on synchronization,
refer to P.41.
9
8
6
7
1 2 3 4 5