Yamaha Professional Audio Workstation AW4416 - Manual (Page 22)

Before you begin
— Operation Guide
7
4. Remove the CD-RW drive cover from the front panel, and remove the
bottom panel.
5. Turn the CD-RW drive over, and insert it little by little, stopping when
the connector end of the CD-RW drive enters the opening in the bottom
of the AW4416.
6. Connect the red and white four-conductor cable included with the
AW4416 to the internal connector of the AW4416 as shown in the dia-
gram. Then connect the cable to the connector of the CD-RW drive.
Bottom panel
CD-R/RW drive
cover panel