Yamaha Professional Audio Workstation AW4416 - Manual (Page 302)

14
— Reference Guide
SET UP screen
Patch IN page
Patching a signal to a channel/track
[Function]
Assign signals to the inputs of input
channels 1–24, return channels 1/2,
and recorder tracks 1–16.
[Key operation]
• [SETUP] key → [F1] (Patch IN) key
(*1)
• Repeatedly press the [SETUP] key
until the display shown at right
appears.
*1. In the SET UP screen, the tabs dis-
played at the bottom are divided
into two groups. If the Patch IN tab is
not assigned to the [F1] key when
you press the [SETUP] key, press the
[SETUP] key + [F1] (CHANGE TAB)
key to switch the tab.
[Mouse operation]
M button → SETU button → Patch IN tab
[Screen functions]
A MIXER CHANNEL INPUT ASSIGN
Select the signal that will be assigned to input
channels 1–24 and return channels 1/2. The fol-
lowing signals can be assigned to each channel.
● Input channels 1–24
● Return channels 1/2
B EFFECT PATCH
Select whether effects 1/2 will be used via AUX
send/return (AUX7/AUX8), or inserted into a
specified channel (INSERT). For details on oper-
ation, refer to Operation Guide “Chapter 10.
Internal effects.”
2
1
3
Display Signal type
AD 1–AD 8 INPUT jacks 1–8
SL1-1 – SL1-8
INPUT 1–8 of an I/O card
(slot 1)
SL2-1 – SL2-8
INPUT 1–8 of an I/O card
(slot 2)
DIN L/DIN R
L/R channels of the DIGITAL
STEREO IN jack
SMP 1–SMP 8 Sampling pads 1–8
MET Internal metronome
Display Signal type
EFF1 L/R Return of internal effect 1
EFF2 L/R Return of internal effect 2
AD 1/2–AD 7/8 INPUT jacks 1/2–7/8
SL1-1/2 – SL1-7/8
INPUT 1/2–7/8 of an I/O
card (slot 1)
SL2-1/2 – SL2-7/8
INPUT 1/2–7/8 of an I/O
card (slot 2)
DIN L/R
DIGITAL STEREO IN jack
(stereo)