Yamaha Professional Audio Workstation AW4416 - Manual (Page 340)

PAN/ROUTE screen
52
— Reference Guide
Pair CH/Pair BUS pages
Set channel/bus pairing
[Function]
Set or defeat pairing of buses 1/2–7/8 and
AUX 1/2–5/6 for adjacent odd-numbered
→ even-numbered channels.
[Key operation]
• [EQ] key → [F4] key (Pair CH)/[F5] (Pair
BUS)
• Repeatedly press the [PAN] key until
one of the screens shown at the right
appears.
[Mouse operation]
M button → EQ button → Pair CH tab/Pair
BUS tab
[Screen functions]
A Channel/bus
These are the channels/bus for which pairing
will be set or defeated.
B Pairing
These buttons set or defeat pairing.
The heart symbol will be connected for chan-
nels/buses that are paired, and the button will
be displayed as “STEREO.”
The heart symbol will be divided for channels/
buses that are not paired, and the button will be
displayed as “MONO x2.”
Tip!
• All parameters other than attenuation and
pan will be linked for channels that are
paired.
However, pan will be linked if the pan mode
is set to GANG or INVERTED GANG. It will
not be linked if the pan mode is set to INDI-
VIDUAL (the default setting).
• For buses that are paired, the master level
(HOME screen/Bus page) will be linked.
• For AUX buses that are paired, the master
level (HOME screen/Bus page) and the send
level of the signals sent from each channel to
the corresponding AUX bus will be linked.
● Pair CH
1
2
● Pair BUS
1
2