Xerox 2025 - Manual (Page 92)

QMS 3825/3225/2025 User's Guide 4-2
Introduction
Introduction
This chapter covers printer problems that may occur as a result of
■ Application software
■ Computer hardware
■ Printer hardware
Control Panel Messages
Printer control panel messages help you locate many problems.
When the printer needs operator assistance, the message window
displays one of the following messages:
ADJUST LCIT BIN The large-capacity or large-large-capacity bin is not
inserted correctly.
ADJUST NUMBER
OUTPUTBIN
The specified output bin is not set, or the bin cover is
open.
ADJUST SIZE BIN Check the specified input bin to make sure it is
inserted correctly and the cover is closed.
CLEANER ABSENT The cleaning unit is not installed.
CLEAR DUPLEXER
JAM Media has jammed while passing through the
duplexer.
CLEAR PAPER
EJECTION JAM Clear jam from output areas.
CLEAR PAPER FEED
JAM Clear jam from the paper feed area.
CLEAR PAPER PATH
JAM Check the printer icon for location of jam and clear
jammed media from all highlighted locations.
CLOSE DUPLEXER
DOOR The duplexer door is open and must be closed.
CLOSE FRONT DOOR The front door is open and must be closed.
CLOSE SIDE
DOOR(S) One or more of the side doors is open and must be
closed.