Xerox 2025 - Manual (Page 123)

Changing the
LLCIT Paper Size
5-15 Advanced Printer Use
b Remove the
three black
screws from
the silver top
section of the
side rail.
c Lift the end of
the size
indicator bar at
top rear.
d Remove the
silver section
of the side rail.
e Disconnect the keyring-type fastener at the bottom of the
chain guide.
f Tilt and
remove the
side rail.
» Note: Store the
2 rail sections,
2 thumb
screws, and 3
black screws in
the printer’s
storage cabinet
in case you
change the
paper size again
later.
g Reattach the chain guide.
h Skip to “Reassemble the LLCIT” on page 5-17.