Xerox 2025 - Manual (Page 62)

Using the Large-
Capacity Output
Stacker
QMS 3825/3225/2025 User’s Guide 2-34
Using the Large-Capacity
Output Stacker
The stacker stacks paper face down, so jobs can be located and sep-
arated easily. A clear window on the top of the stacker allows you to
monitor work face up on its way to the stacker.
» Note: For best performance from your stacker, we recommend that
you use Xerox 4024 paper. The wrapper on the paper has an arrow to
indicate which side should be printed first. Load paper with the arrow
pointing up. Using proper paper, fed properly, helps reduce curl and
prevent jams.
Once the Large-Capacity Output Stacker is installed, the main power
supply to the printer enters through the stacker.
» Note: Always use the stacker power switch as the main power switch..
To remove your print jobs from the stacker:
❖
1 Press the Online/Offline key on the printer control panel to
take the printer off line.
2 Press the Tray Down key on the stacker and wait for the tray
to reach the bottom.
» Note: If the tray is completely full, it is at the bottom and you
do not need to press the Tray Down key.
3 Open the stacker door and remove all the paper from the
stacker.
» Note: Removing all print jobs helps the unit stack jobs more
neatly and helps prevent paper jams.
4 Close the stacker door. The tray will rise automatically.
5 Press the Online/Offline key to put the printer back on line.