Changing llcit paper size, Remove and disassemble the llcit, Changing optional large-large-capacity tray size – Xerox 2025 User Manual
Page 112
QMS 3825/3225/2025 User's Guide
5-4
Changing LLCIT
Paper Size
Changing LLCIT Paper Size
Changing the paper size for the LLCIT requires special care to avoid
damaging electrical connections. We recommend that you
✓
Evaluate your printing needs and choose one size for the LLCIT
✓
Have the service representative set the LLCIT for that size
during installation
✓
Do not alter the size setting
»
Note: Only a qualified QMS service technician should change the LLCIT
size settings. The following instructions are included to assist service
personnel. If you damage the printer or the Large-Large-Capacity
Input Tray while changing the size settings, it will affect your
warranty.
Remove and Disassemble the LLCIT
»
Note: Before you begin this procedure, note the paper size setting.
You will need to know what you are changing from to complete the
process.
WARNING!
It takes two people to lift the LLCIT in and out of the
printer. Do not lift the LLCIT with paper loaded in it.
ACHTUNG! Man benötigt 2 Personen um den LLCIT zu tragen. Tragen
Sie den LLCIT nie mit eingelegtem Papier.
1
Remove the upper and lower input bins.