Xerox 2025 - Manual (Page 118)

Changing the
LLCIT Paper Size
QMS 3825/3225/2025 User’s Guide 5-10
Adjust Side Rails to Match DIP Switches
The side rails must be adjusted to match the paper size you have
chosen. The steps for adjusting the right side rail are the same for all
sizes. The steps for the left rail differ according to the paper size. Fol-
low the steps for the right side, then check the chart to see which set
of instructions to follow for the left side. After adjusting both sides, skip
to “Reassemble the LLCIT,” on page 5-17.
» Note: If you are changing between Letter and Ledger or between A3 and
A4, the side rails do not need to be adjusted.