Introduction, Turning on the printer, How to turn on the printer – Xerox 2025 User Manual
Page 30
Introduction
QMS 3825/3225/2025 Users Guide
2-2
Introduction
This chapter explains daily printer operation. It contains information
about printing on paper, labels, and transparencies; selecting and
storing media; using the control panel; adding paper to the input bins;
duplexing; collating; changing resolution; and selecting page
orientation.
Turning on the Printer
The printer’s power switch is located on the right rear panel. Make
sure the power cord is properly connected to the printer and to a
grounded outlet before turning on the power switch.
»
Note: If the optional Large Capacity Output Stacker is installed
(3825 Print System only), always use the stackers power switch.
The power indicator on the control panel lights when the printer is on.
Unless it’s disabled, a start-up page prints after the printer performs
its initial self-tests. The start-up page lists the printer’s name, all avail-
able interfaces, and other useful information.
Power switch