Zebra Technologies Z6Mplus - Manual (Page 89)

Configuration
Configuration and Calibration LCD Displays
13163L Rev. 3 5/20/2004 Z4Mplus/Z6Mplus User Guide 71
RTC TIME RTC Time
If the RTC is installed, this parameter allows changing of time.
1. Press SELECT to select the parameter.
2. Press PLUS (+) to increase the value of the selected digit.
3. Press MINUS (–) to move to the next digit.
4. Press SELECT to accept any changes and deselect the parameter.
PASSWORD
LEVEL
1
Password Level
This parameter allows you to select whether certain Zebra-selected menu items
(selected items) or all menu items (all items) are password protected.
Default: Selected items
Selections: Selected items, all items
1. Press SELECT to select the parameter.
2. Press PLUS (+) or MINUS (–) to display other choices.
3. Press SELECT to accept any changes and deselect the parameter.
LANGUAGE Selecting the Display Language
This parameter allows you to change the language used on the front panel display.
Default: English
Selections: English, Spanish, French, German, Italian, Norwegian, Portuguese,
Swedish, Danish, Spanish2, Dutch, Finnish, Japan
1. Press SELECT to select the parameter.
2. Press PLUS (+) or MINUS (–) to display other choices.
3. Press SELECT to accept any changes and deselect the parameter.
1 Appears when a ZebraNet wired or wireless print server is installed.
Table 9 • Printer Parameters and Other LCD Displays (Sheet 15 of 15)
Parameter Action/Explanation