Zebra Technologies Z6Mplus - Manual (Page 108)

90 Z4Mplus/Z6Mplus User Guide 13163L Rev. 3 5/20/2004
Troubleshooting
LCD Error Conditions and Warnings
OUT OF MEMORY* *There is not enough memory to
perform the function shown on
the second line of the error
message. Insufficient DRAM for the label length,
downloaded fonts/graphics, and images.
Ensure that the device, such as FLASH
memory or PCMCIA card, is installed and
not write protected or full.
Ensure that the data is not directed to a
device that is not installed or available.
Table 12 • Error Conditions and Warnings (Continued)
Error Potential Problem Recommended Solution