General specifications – Zebra Technologies Z6Mplus User Manual
Page 128

110
Z4Mplus/Z6Mplus User Guide
13163L Rev. 3 5/20/2004
Specifications
General Specifications
General Specifications
Table 19 • Z4Mplus and Z6Mplus General Specifications
General Specifications
Z4Mplus
Z6Mplus
Height
13.3 in.
338 mm
13.3 in.
338 mm
Width
10.9 in.
277 mm
13.4 in.
341 mm
Depth
18.7 in.
475 mm
18.7 in.
475 mm
Weight (without options)
32.4 lbs.
14.7 kg
34.7 lbs.
16 kg
Electrical
90-265 VAC, 48-62 Hz, 5 Amps (fused) 90-265 VAC, 48-62 Hz, 5 Amps
(fused)
Agency Approvals
UL 1950, CISPR 22 (class B), CSA 22.2 No. 950-95, IEC60950, EN60950,
EN500824, EN55022 (class B), EN55024, EN61000-3-2, -3-3. Complies with
FCC Class B and Canadian Doc Class A rules. Carries the CE mark of
compliance. Product markings: cULus, CE Marking, FCC-B, ICES-003, VCCI,
C-Tick, NOM, IRAM, CCC, GOST-R, BSMI.
Temperature
Operating
40° to 104°F
5° to 40°C
40° to 104°F
5° to 40° C
Storage
–40° to 140°F
–40° to 60°C
–40° to 140°F
–40° to 60°C
Relative
Humidity
Operating
20% to 85%, non-condensing
20% to 85%, non-condensing
Storage
5% to 85%, non-condensing
5% to 85%, non-condensing
Communication Interface
RS-232/CCITT V.24 serial data interface; 110 to115000 baud, parity,
bits/character, 7 or 8 data bit, and XON-XOFF, RTS/CTS or DTR/DSR
handshake protocol required. 750mA at 5V from pin 9.
8-bit parallel data interface; supports IEEE 1284 bi-directional parallel, ECP
and nibble mode compliant. Error detection CRC protocol.
Memory
8 MB DRAM memory (3.5 MB user available)
2 MB flash memory