Zebra Technologies Z6Mplus - Manual (Page 112)

94 Z4Mplus/Z6Mplus User Guide 13163L Rev. 3 5/20/2004
Troubleshooting
Miscellaneous
Miscellaneous
Table 16 • Miscellaneous Problems and Solutions
Issue Recommended Solution
The printer is displaying a
language that I cannot read. 1. Press SETUP/EXIT to enter configuration mode.
2. Press MINUS ( – ).
The printer displays the LANGUAGE parameter in the current
language. Even if you cannot recognize the characters in the current
language, you can still scroll to another one.
3. Use PLUS ( + ) or MINUS ( – ) to select another language.
4. Press SETUP/EXIT twice to exit configuration mode and save the
changes (if the language does not change, you need to scroll to a
different save option by pressing SELECT).
5. Reenter configuration mode and press MINUS ( – ) to see which
language is displayed.
6. Repeat this process, if necessary, until you reach the desired language.