Toshiba Libretto U100 - Manual (Page 80)

4-10 User’s Manual
Operating Basics
Using optical media drives
The text and illustrations in this section refer primarily to the optional
media drive. However, operation is the same for all other optical media
drives. The full-size drive provides high-performance execution of
CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used
for CD/DVD-ROM operation. When the computer is accessing a
CD/DVD-ROM, an indicator on the drive glows. For detailed information,
refer to Chapter 8, libretto DVD Dock .
If you have a DVD-ROM and CD-R/RW drive, refer also to the Writing CDs
on DVD-ROM and CD-R/RW drive section for precautions on writing to
CDs.
If you have a DVD Super Multi drive, refer also to the
Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs/DVDs.
Loading discs
To load CD/DVDs, follow the steps below and refer to figures 4-4 to 4-7.
1. When the computer’s power is on, press the eject button to open the
disc tray slightly.
Figure 4-4 Pressing the eject button
■ The optical media drive is optional.
■ The optical media drive can be used by connecting libretto DVD Dock
to this computer.
Use the WinDVD application to view DVD-Video discs.
When playing DVD-Video, always connect the AC adaptor to ensure
maximum performance. Operation on battery power might result in skipped
frames.
Eject Button