Toshiba Libretto U100 User Manual
Page 69
User’s Manual
3-19
Getting Started
3. A menu appears. Press the “1” key on the keyboard to restore the
original configuration as purchased. Press the “2” key to keep your
current partitions intact and restore. Press the “3” key to specify
partitions and restore.
4. Follow the on-screen instructions.
Restoring the preinstalled software from your created
Recovery Media
If preinstalled files are damaged, you can either use the Recovery Media
you have created or the hard disk drive recovery to restore them. To restore
the operating system and all preinstalled software, follow the steps below.
1. Load the Recovery Media in the optional optical media drive and turn off
the computer’s power.
2. Hold down the F12 key and turn on the power. When In Touch with
Tomorrow TOSHIBA
appears, release the F12 key.
3. Use the left or right cursor key to select the CD-ROM icon in the display
menu. For details, refer to the
Setup.
4. A menu appears. Press the “1” key on the keyboard to restore the hard
disk configuration, press the “2” key to restore drive C:, and press the
“3” key to restore the recovery tool.
5. Follow the on-screen instructions.
This feature is only available for models which are configured for hard disk
recovery. For these models Product Recovery media is not supplied with
the computer.
■
The optional libretto DVD Dock is needed to use the DVD-ROM and
CD-R/RW drive or DVD Super Multi drive.
■
An external optical media drive that is sold separately and is
compatible with the computer is required to use the Recovery Discs to
restore the preinstalled software. These drives can be purchased from
TOSHIBA dealers.
■
This computer supports the following optical disc drives for
restoring the preinstalled software:
External CD-RW/DVD-ROM Drive PA3352A, PA3352C, PA3352L
External DVD Super-Multi Drive PA3402C, PA3402A, PA3402L
Slim Combo CD-R/RW and DVD-ROM PA3438U
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.