Toshiba Libretto U100 - Manual (Page 143)

User’s Manual 7-3
HW Setup
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
*
1
The floppy disk drive will be used to start the notebook when there is a
bootable disk contained in the external drive. If SD memory is installed as
well, the external floppy disk drive will be checked first, followed by the SD
memory device itself.
*
2
The optical media drive will be used to start the notebook when there is a
bootable disk contained in the drive.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons:
Built-in HDD, CD-ROM, FDD (or SD memory card), Network (LAN),
USB Memory boot.
U Selects the USB floppy disk drive.
N Selects the Network.
1 Selects the primary HDD.
C Selects the CD-ROM* 2 .
M Selects the USB Memory.
A bar will appear only under the selected device.