Special features, Special features -12 – Toshiba Libretto U100 User Manual
Page 30

1-12
User’s Manual
Introduction
Special features
The following features are either unique to TOSHIBA computers or are
advanced features, which make the computer more convenient to use.
Disclaimer (Wireless LAN/Atheros)
The transmission speed over the wireless LAN and the distance over
which wireless LAN can reach may vary depending on surrounding
electromagnetic environment, obstacles, access point design and
configuration, and client design and software/hardware configurations.
[54Mbps is the theoretical maximum speed under the IEEE802.11 (a/b/g)
standard.] The actual transmission speed will be lower than the theoretical
maximum speed.
To use the Atheros Super AG
TM
or Super G
TM
function, your client and
access point must support the corresponding feature. Performance of
these functions may vary depending on the format of data transmitted.
Wireless
communication
switch
This switch turns the Wireless LAN and
Bluetooth functions on and off.
All models are provided with Wireless
Communication switch. Some models are equipped
with both Wireless LAN and Bluetooth functions.
Hot keys
Key combinations let you quickly change the
system configuration directly from the keyboard
without running a system configuration program.
Display automatic
power off
This feature automatically cuts off power to the
computer’s LCD display panel when there is no
keyboard input for a time specified. Power is
restored when any key is pressed. You can
specify the time in the Monitor power off item of
the Basic Setup tab in TOSHIBA Power Saver.
HDD automatic
power off
This feature automatically cuts off power to the
hard disk drive when it is not accessed for a time
specified. Power is restored when the hard disk is
accessed. You can specify the time in the HDD
power off item of the Basic Setup tab in TOSHIBA
Power Saver.
System automatic
Standby/Hibernation
This feature automatically shuts down the system
in Standby mode or Hibernation mode when there
is no input or hardware access for a time
specified. You can specify the time and select
either the System Standby or System Hibernation
item of the Basic Setup tab in TOSHIBA Power
Saver.