Toshiba Libretto U100 - Manual (Page 136)

6-14 User’s Manual
Power and Power-Up Modes
Installing the battery pack
To install a battery pack, follow the steps below.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Close the LCD display panel and turn the computer upside down.
4. Insert the battery pack (
➀).
5. Secure the battery pack lock. Check the battery lock ( ➁) was changed
to the lock position ( ).
Figure 6-2 Securing the battery pack
6. Return your computer to the upright position.
Do not touch the battery release latch while holding the computer or you
may get injured if the battery pack falls out due to the unintentional release
of the battery release latch.
Battery pack
Battery lock