Toshiba Libretto U100 - Manual (Page 76)

4-6 User’s Manual
Operating Basics
If the fingerprint sensor and Trusted Platform Module (TPM)security are
used as identification devices, install and configure the Infineon TPM
Professional package first before configuring the fingerprint utility. Please
refer to the TPM (Trusted Platform Module) Installation Guide for the
installation and configuration methods for TPM.
In the help file, it is stated that this software's Password Replacement
function can be used for the Internet and general applications. However,
the Internet Password Replacement function in the fingerprint utility
provided in this computer can only be used with IE (Internet Explorer).
There is a section on Strong Logon Security in the help file, but the
function is not available in the fingerprint utility provided in this computer.
The sound during Log Off Current User (when logging off from OmniPass)
cannot be set to off even if the No Audio Prompts configuration is set in
Audio Settings. If you wish to turn it off, remove the settings for wav files in
the event settings of the sound events section of the Sound and Audio
Device Property in the control panel.
Set Up Procedure
Please use the following procedure when first using fingerprint
authentication.
Fingerprint Registration
Enroll the required authentication data using the “OmniPass Enrollment
Wizard”.
1. Click start, Point to All Programs, point to Softex and click OmniPass
Enrollment Wizard.
2. Click Enroll.
3. Ensure the same Windows logon username and domain (*) are
displayed before entering a password into the Password field.
Click Next.
(*) If the Windows logon account is for use within a LAN domain, enter the
domain name, otherwise, if you are unsure, please check with the network
administrator. If the logon is not used within a LAN domain, you should just
enter the computer name.
4. The Choose Finger screen is displayed. Based on the illustration,
select the finger to be recognized, and then click Next. Previously
enrolled fingerprints would have green check marks. The fingerprint
being enrolled now would have a red check mark. If any of the
previously enrolled fingerprints is selected again, the latest information
will be enrolled and previous information over-written.
The fingerprint authentication uses the same Windows logon ID and
password. If the Windows logon password has not been setup, please do
so before registration.