Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 240)

WLS 8400 Product Reference Guide 10-24
Specific String, Any Location
Scan this bar code, then, using the Numeric Keypad on page 10-25, scan a two-digit number
representing the position (use a leading “zero” if necessary). Then scan the desired
character or characters (up to a total of 8) on the Alphanumeric Keyboard on page 10-107,
followed by the
End of Message bar code on page 10-118.
After scanning the following bar code:
1. Enter a location using the “Numeric Keypad” on page 25 .
2. Enter a string using the Alphanumeric Keyboard beginning on page 10-107.
3. Scan End of Message on page 10-118.
Specific String Any Location
Any Message OK
By not scanning any bar code, all selected code types are formatted, regardless of
information contained.