Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 209)

Miscellaneous Scanner Options 9-3
Introduction
This chapter includes commonly used bar codes to customize how the data is transmitted
to the host device. In addition to these bar codes for data formatting, see each host chapter
for the appropriate host connections and host device features for the scanner. See Chapter
8, Symbologies and Chapter 10, Advanced Data Formatting for customizing data for
transmission to the host device.
Before programming, follow the instructions in Chapter 1, Getting Started.
The scanner is shipped with the settings shown in the Miscellaneous Scanner Options
Default Table on page 9-4 (also see Chapter A, Standard Default Parameters for all host
device and miscellaneous scanner defaults). If the default values suit the requirements,
programming may not be necessary. Features values are set by scanning single bar codes
or short bar code sequences.