Set lengths for codabar (continued) – Wasp Bar Code Wasp Duraline WLS 8400 FZ User Manual
Page 194
WLS 8400 Product Reference Guide
8-48
Set Lengths for Codabar (continued)
Length Within Range - This option allows the scanner to decode a Codabar symbol
with a specific length range. The length range is selected from numeric bar codes
beginning on page
in
For example, to decode
Codabar symbols containing between 4 and 12 characters, first scan Codabar - Length
Within Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by
a leading zero). In case of an error, or to change the selection, scan Cancel on page
Codabar - Length Within Range
Any Length - This option allows the scanner to decode Codabar symbols containing any
number of characters within the scanner capability.
Codabar - Any Length
This manual is related to the following products: