Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 212)

WLS 8400 Product Reference Guide 9-6
Scan Angle
The scanner supports two scan angles. This parameter provides two options for the length
of the laser scanning beam. Use the bar codes below to change scan angles.
*Normal Angle
Alternate Angle
Prefix/Suffix Values
A prefix/suffix may be appended to scan data for use in data editing. These values are set
by scanning a four-digit number (i.e., four bar codes) that corresponds to key codes for
various terminals. For conversion information, see the ASCII Character Set tables in the
appropriate host chapter. Numeric bar codes begin on page
D-1 in Chapter D, Numeric
Bar Codes . In case of an error, or to change the selection, scan Cancel on page D-7 .
Scan Prefix
Scan Suffix