Set lengths for msi (continued) – Wasp Bar Code Wasp Duraline WLS 8400 FZ User Manual
Page 197
Symbologies
8-51
Set Lengths for MSI (continued)
Two Discrete Lengths - This option allows the scanner to decode only those MSI
symbols containing either of two selected lengths. Lengths are selected from the numeric
bar codes beginning on page
. For example, to
decode only those MSI symbols containing either 2 or 14 characters, select MSI - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the
selection, scan Cancel on page
MSI - Two Discrete Lengths
Length Within Range - This option allows the scanner to decode an MSI symbol
with a specific length range. The length range is selected from numeric bar codes
beginning on page
For example, to decode MSI
symbols containing between 4 and 12 characters, first scan MSI - Length Within Range.
Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero).
In case of an error, or to change the selection, scan Cancel on page
.
MSI - Length Within Range