Westell Technologies Wirespeed 2100 - Manual (Page 83)

030-300198 Rev. D 81 March 2003
WireSpeed Dual Connect NAT Router User Guide
Remote Access
The following screen will appear if you select Remote Access from the Maintenance menu. To enable Remote
Access, type in a password and click on the enable remote access button.
Enabling Remote access allows your Internet service provider to access your Router via HTTP web screens. This
feature can be activated only when the user wants to grant access rights to the Internet service provider
NOTE: The password should be at least 4 characters long and should not exceed 32 characters. Do not type a blank
space or asterisks in the Password field. The password is also case sensitive.
User Name Displays your current User Name (Static field)
Password Field for entering your password
URL Displays the IP address of the remote management gateway
The following screen displays a message that the remote access is currently enabled. After 20 minutes of inactivity,
or on reboot, remote access will be disabled automatically. To disable remote access, click on the disable remote
access button.