Adding a nat service to a profile – Westell Technologies Wirespeed 2100 User Manual
Page 67

030-300198 Rev. D
65
March 2003
WireSpeed Dual Connect NAT Router
User Guide
Adding a NAT Service to a Profile
The following screens show you how to add NAT services to your profile. Remember, you may attach an unlimited
number of services to your profile.
NOTE: Westell has developed an extensive list of NAT services and you may select any service from this list. By
selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your
Router are open and that the required application traffic can pass through your LAN. For a list of supported services,
please go to section 9.8 (NAT Services).
Select Service Configuration from the Configuration menu. Choose a NAT service from the selection provided at
the Service Name pull-down arrow. Next, click on enable.
If you clicked on enable, the following Host Service screen will be displayed. Click on OK. This will load the new
NAT Configuration and the settings will be saved automatically.