Toshiba TOSNIC-7000S - Manual (Page 9)

- 8 -
6 F 3 H 1 0 0 1
3. Handling Precautions (continued)
Do not turn the circuit breakers ON when control power source switch (8A) is OFF.
This may result in failure.
Certain units also have a control power source switch (8D).
This switch has the same functions as the switch 8A.
Do not turn the control power source switch (8A) to the OFF position when the
circuit breakers are ON.
This may result in failure.
Certain units also have a control power source switch (8D).
This switch has the same functions as the switch 8A.
When operating the keys on the graphic display panel, hold down the key for at
least 0.5 second.
The operation may not be performed if the key is held down for
shorter periods of time.
When operating the reset key on the graphic display panel, hold down the key for at
least 5 seconds.
The reset operation may not be performed if the key is held
down for shorter periods of time.
PROHIBITED
PROHIBITED