Toshiba TOSNIC-7000S User Manual

Page 39

- 38 -

6 F 3 H 1 0 0 1

(2) Table 8.5 shows the procedure used to change manually from equalized charge to

floating charge.

After the charging mode has been changed to equalized charge using the procedure
on the previous page, the mode will automatically change back to floating charge after
a set period of time has elapsed. Therefore, normally there is no need to change the
mode manually as described below.

Table 8.6 Changing From Equalized Charge to Floating Charge

Step Procedure

LCD/LED

Status (After Execution)

Check to make sure
that the "EQUAL
CHARGE" LED is lit.

2 Hold

down

the

"FLOAT

/ EQUAL" key (

h in

Figure 6.3.1 on page
14) for at least 0.5
second.

→ Change to floating

charge is complete.

The "FLOAT CHARGE" LED lit.
The "EQUAL CHARGE" LED unlit.

UPS SUPPLY

AC-VO 200[V]
AC-

O 50[

]

AC-VO 200[V]
AC-

O 50[

]

BATTERIES

SWITCH

UPS

BYPASS

DISCHARGE

FLOAT CHARGE

EQUAL CHARGE

～

AC INPUT

～

CONVERTER

～

INVERTER

～

AC OUTPUT

BYPASS INPUT

～