Toshiba GL-1010 User Manual
Page 79
GL-1010 Scan Operator’s Guide
79
Press the
Y
ES
key. The Job is canceled. To stop the
cancellation, press the
N
O
key.
n
To change the scan settings, press the S
ETTING
key to change
the scanning settings in the Scanning Parameter Setting
screen.
For further information, refer to Scan Setting
3
Press the F
INISH
key to finish scanning.
4
When scanning is complete you will return to the Template
Selection List screen. The scanned image data is saved on the
controller HDD.
H
ANDLING
P
APER
J
AMS
In the event of a paper jam, the copier displays procedures on the
panel to assist with resolving the jam. When the jam is cleared,
Jam Recovery will display on the screen.
1
Press the hard
START
button or
S
CAN
! to continue ADF scan.
2
Press the
C
ANCEL
J
OB
key or hard
FC
button to cancel a job.
3
The screen will display Cancel Confirm.
n
When using the ADF, if the job stops due to an error, such as
Job Overflow, during the continuous scanning of multiple
GL-1010 Scan Operator's Guide.book Page 79 Friday, October 5, 2001 10:30 AM