Scanning from the glass – Toshiba GL-1010 User Manual
Page 69
GL-1010 Scan Operator’s Guide
69
Scanning from the Glass
Follow these steps when scanning by placing the original on the
glass.
1
The Scanning Status screen displays.
2
The Waiting for next page screen displays after the last page
is scanned.
n
To scan another job, press
S
CAN
!
or the hard
START
button
again after placing another original on the glass.
n
To cancel the job, press the
C
ANCEL
J
O
B
button or the hard
FC
button to cancel a job. The Cancel Confirm screen displays.
Press the
Y
ES
key. The Job is canceled. To stop the
cancellation, press the
N
O
key.
n
To change the scan settings, press the
S
ETTING
key to change
the scanning settings in the Scanning Parameter Setting
screen.
For further information, refer to Scan Setting
3
Press the F
INISH
key to finish scanning.
4
When scanning is complete, the Template Selection List
screen displays. Scanned image data is saved on the
controller HDD.
The number of pages that have been
scanned is displayed.
The number of pages that have been
transferred from the copier to the
controller is displayed.
The auto detected original size is
displayed when Scan Setting for
Original size is set to AUTO.
GL-1010 Scan Operator's Guide.book Page 69 Friday, October 5, 2001 10:30 AM