Toshiba GL-1010 - Manual (Page 72)

72
GL-1010 Scan Operator’s Guide
originals, data being read at the time of the error is canceled.
Data that was read before the error, is stored.
n The maximum size for a single scan job is 180 MB. The
maximum size limit may be less and vary depending on the
available memory and available free space on the controller
HDD.
Private Scan
The Private Scan button is available to users who want to utilize
Groups and Templates that have been created for private use with
specific parameters and attributes. Groups and Templates may be
password protected and require a password before they can be
accessed. If the templates are not protected, they can be used by
all users connected to the controller.
W HEN USING THE
A UTOMATIC
D OCUENT F EEDER
1 Place the original(s).
2 Align the edges of the originals. Set the originals face up on
the feed tray and then align the sliders to the edges of the
originals.
M The maximum number of the originals you can scan at
one time is 100 sheets.
− Up to 100 sheets (200 images if duplex) can be scanned with
the feeder. Continuous scanning is possible one time per
scan job. A maximum of 400 images can be scanned when
using continuous scan mode.
N O T E :
Template settings can be
edited with the
TopAccess (End User
Mode) web site. Refer to
Create Private
Templates
on page 44 or
the TopAccess Online
Help.
N O T E :
Remove any paper clips
or staples from originals
before placing them on
the original feed tray.
GL-1010 Scan Operator's Guide.book Page 72 Friday, October 5, 2001 10:30 AM