Toshiba GL-1010 - Manual (Page 70)

70
GL-1010 Scan Operator’s Guide
ADF Scanning
Follow these steps when using the Automatic Document Feeder
for scanning.
1 The Scanning Status screen displays.
− To scan additional originals after the current job, press
the
C ONTINUE
key. The Continue key can be repeated
up to one time. The Continue key will not display after
the first use. The Scanning Status screen will display.
Proceed with the next step.
− If you do not press the C ONTINUE
key, scanned image
data is saved on the controller HDD automatically, and
you will return to the Template Selection List screen.
− To stop ADF scan during continuous mode, press the
hard C LEAR /S TOP
button.
2 The Waiting for continuous scan screen displays after the last
page is scanned.
n
To scan another job, press S CAN ! or the hard
START
button
again after placing another original on the ADF.
n
To cancel the job, press the C ANCEL J OB button or the hard
FC
button to cancel a job. The Cancel Confirm screen displays.
GL-1010 Scan Operator's Guide.book Page 70 Friday, October 5, 2001 10:30 AM