Toshiba GL-1010 - Manual (Page 78)

78
GL-1010 Scan Operator’s Guide
ADF Scanning
Follow these steps when using the Automatic Document Feeder
for scanning.
1 The Scanning Status screen displays.
− To scan additional originals after the current job, press
the
C ONTINUE
key. The C ONTINUE
key can be repeated
up to one times. The C ONTINUE
key will not display
after the first use. The Scanning Status screen will dis-
play. Proceed with the next step.
− If you do not press the C ONTINUE
key, scanned image
data is saved on the controller HDD automatically, and
you will return to the Template Selection List screen.
− To stop ADF scan during continuous mode, press the
hard C LEAR /S TOP
button.
2 The Waiting for continuous scan screen displays after the last
page is scanned.
n
To scan another job, press S CAN ! or the hard
START
button
again after placing another original on the ADF.
n
To cancel the job, press the C ANCEL J OB button or the hard
FC
button to cancel a job. The Cancel Confirm screen displays.
GL-1010 Scan Operator's Guide.book Page 78 Friday, October 5, 2001 10:30 AM